tags: Various problems or errors
ERROR in Entry module not found: Error: Can't resolve './src' in 'F:\demo\webpack'

This problem may be two cases,
1. The src directory is not created in the root directory of the project
2. Check if webpack.config.js is in the root directory
My reason is caused by putting webpack.config.js under src
1. The directory structure is as follows: 2. webpack.config.js document follows 3. Content given: Solution: 1. Check whether webpack.config.js file name correctly, whether the name at the beginning an...
An error occurred when using webpack for packaging: ERROR in Entry module not found: Error: Can’t resolve'. The solution steps are as follows. 1. The error situation when packing is as follows 2...
webpack I encountered such a problem when I first learned webpack packaging configuration The key is that the executable file directory is wrong... is mainly because of the relative path of webpack.co...
Another day of stepping on the pit All configurations using WebPack packages are correct, no endless Not much more nonsense WebPack V4 is only valid when there is a SCR / INDEX.JS file. In other words...
problem solved: The path is tried to use an absolute path....
The following is a relatively complete and simple package: 1. Make sure nodeJS has been installed. 2. Create webpack-demo, mine is under f drive, 2. Then enter this folder: 3. To initialize, ch...
After the introduction of bootstrap, webpack packaging error This is because webpack packaged bootstrap4 when the need to manually installjquerywithpopper.js webpack can be configured as follows...
question DOWN has a Vue project. After running NPM Install, then execute NPM Run Serve. Reprinted here for a colleague's blog; Solution 1. Delete the node_modules folder under the Vue project; 2. Dele...
An error occurred when using webpack for packaging:ERROR in Entry module not found: Error: Can’t resolve '。 The solution steps are as follows. 1. Errors reported during packaging are as follows ...
I studied the react project and wanted to change the file ending with .js to the ending with .jsx, but I kept reporting errors. After searching online for a long time, I finally solved it. In the webp...