Caffe (18)-drawing network model

        python/draw_net.py. This file is used to draw the network model. That is to change the network model from prototxt to a picture.
         1 Install GraphViz

# sudo apt-get install GraphViz

2 Install pydot

# sudo pip install pydot

After installation, you can use scripts to draw pictures
 draw_net.py takes three parameters when executed
 1) Network model prototxt file
 2) The path and name of the saved picture
 3) --rankdir=x, x has four options, namely LR, RL, TB, BT. Used to indicate the direction of the network, from left to right, from right to left, from top to bottom, and from bottom to top. The default is LR.
 Example: draw Lenet

# sudo python python/draw_net.py examples/mnist/lenet_train_test.prototxt netImage/lenet.png --rankdir=BT

Example: Draw the model of cifar10

# sudo python python/draw_net.py examples/cifar10/cifar10_full_train_test.prototxt netImage/cifar10.png --rankdir=BT

Intelligent Recommendation

caffe basics-11 drawing network

caffe basics-11 drawing network Picture reference...

Resnet 18 network model

1. Residual network: (resnet) Residual block: Let's focus on the part of the neural network: as shown on the left side of the figure, assuming that our original input is X, and the ideal mappin...

Schematic diagram of drawing model structure under Caffe

Under Linux Under caffe/python there will be a draw_net.py template for plotting the prototype structure in prototxt format. 1. Install python dependencies Open cmd and input the following content. If...

Caffe build neural network model

Caffe build neural network model CaffeIt is a very powerful deep learning framework, where bloggers record some experience in the course of, not covered by the official website and look up contentGith...

caffe network model configuration instructions

Reference: https: //blog.csdn.net/cuxieqian4199/article/details/79914010 caffe model requires two most important parameters file: network model and model parameters, namely * .prototxt and * .solver.p...