A picture is worth a thousand words --- Lu Xun New here, please advise if you have any questions. overall Master-slave mode operation full duplex operation half duplex operation Automatic slave select...

1. Introduction Mcal: Micro -controller abstraction layer; the lower layer in the BSW layer; McAL subdivision can divide the driver as: microcontroller driver, memory drive, communication driver, IO d...

Follow "Embedded Software Practical School" and reply "AUTOSAR" to get more practical tutorials. The following content includes: basic concepts, module dependencies, application ti...

This article summarizes the problems and solutions encountered when configuring CAN MCAL with EB for S32K144 microcontroller. 1. Can Counter ref Can Counter ref defines which counter the CAN module re...

Author: Stephen Du Disclaimer: This article is personal learning notes and summary, representing only personal opinions, and ensuring the content accuracy as much as possible. All text is your own cod...

AutoSAR series explanation (in-depth article) 14.10-Mcal Gtm Tom configuration (below) Mcal Gtm Tom configuration (below) Four, Fgtm configuration Five, Fcmu configuration 1. Fixed crossover 2. Flexib...

Record yourself installation process AUTOSAR MCAL layer of software to prevent installation at a later time forgot. 1, into NXP's official website, then search directly MCAL, stepwise selection from t...

AUTOSAR microcontroller abstraction layer positioned in the lowest hierarchical model the BSW, comprising an internal drive, you can access on-chip peripherals and microcontrollers. Still further, the...

1. Single controller service interface function （1） Can_Init Initialization functions, input to the CAN module to configure the structural pointer, call, initialize the clock, baud rate, pin, and rece...

Summary This note mainly records the preparation work of MACL and EB development based on MPC5744P. Preparation Download MCAL Download EB tool Introduction to AUTOSAR AUTOSAR (automotive open system a...